Free Shipping on Most Items*


Your Cart is Empty


RuggedMade 28 GPM 2 Stage Hydraulic Log Splitter Pump, 3000 PSI

View on Amazon

Brand: RuggedMade


  • New Hydraulic Log Splitter Pump 28 GPM @ 3,600 RPM
  • 5/8" Shaft w/ Keyway
  • 1" Barb Inlet Port
  • 3/4" NPT Outlet Port
  • Aluminum Body

Details: This 2-stage hydraulic gear pump combines a large displacement low-pressure pump and a small displacement high-pressure pump. It is ideal for use with log splitters, machine tools, trash compactors, and other applications. It moves high volumes of fluid when both stages operate together, such as when retracting the cylinder rod after splitting a log. This achieves fast cycle times. It is also capable of generating high pressure when under load, such as when splitting logs.This two-stage pump is a bolt-on replacement for many log splitters and wood processors. SPECIFICATIONS Flow Rate: 28 GPM Pressure: 3000 psi Shaft: Straight, Keyed Shaft Diameter: 5/8" Shaft Length: 1-1/2" Inlet: 1" NPT (F) Recommended Inlet Fitting: Barb Fitting for 1-1/4" ID Hose (Fitting Not Included) Outlet: 3/4" NPT (F) Displacement: (High): 0.465, (Low): 1.39 Direction of Rotation: CW (viewed from shaft end) RPM: 3,600 Minimum Engine Size: 15hp Recommended Engine Size: 20+hp Mounting Flange: 2-Bolt SAE A Orientation: Horizontal or Vertical Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) RECOMMENDATIONS Fluid Reservoir: 14 Gallons Minimum; Recommend 20-30 Gallon tank. Use a 1-1/4 ID Suction Hose and 3/4" ID high pressure hoses. Mount pump at or below level of tank. Mounting pump above tank may cause cavitation. Manufacturer states pump is not designed for use with “universal” or "tractor" hydraulic fluid. Only use ISO 32 or ISO 46 fluid. If return filter is used, make sure flow rate is sufficient. 50 GPM recommended. Suction-side filtration should be no finer than 150 micron. Use of 10-25 micron filters on the suction side will cause failure. Check product description and dimensions to determine fit.

EAN: 0758576971032